Skip to main content

Write an operation condition and time formula in a super routing

Task
Module
Manufacturing
Menu path
Üretim › Üretim Mühendisliği › Rotalar › rota › Yeni Revizyon (Production › Production Engineering › Routings › routing › New Revision)
Screen route
/erp/manufacturing/routings/{id}
Required permission
erp-manufacturing-routings.edit
Prerequisites
  • The routing's output card is configurable and its configuration characteristics are defined.

A super routing is the single routing of a configurable card. It uses the same language as the BOM line rule: Conditions and formulas.

Steps​

  1. In Rotalar (Routings), open the routing of the configurable card and click Yeni Revizyon (New Revision).
    ClickYeni RevizyonExpected: The Yeni Revizyon (New Revision) window; the operations of the latest revision are prefilled, and the rule fields of operations with rules are expanded
  2. On the row of the operation to receive a rule, click the Seçim koşulu ve formüller (Selection condition and formulas) button (screen reader name 'N numaralı operasyonun seçim koşulu ve formülleri' (Selection condition and formulas of operation N)).
    Click40 numaralı operasyonun seçim koşulu ve formülleri
  3. If the operation is to be performed only in some configurations, enter the expression in the Seçim koşulu (Selection condition) field and click Sına (Test).
    EnterSeçim koşuluValue: KORUMA = EVET
  4. If the time depends on the configuration, enter the expression in the Hazırlık formülü (dk) (Setup formula, min), Makine formülü (dk) (Machine formula, min) or İşçilik formülü (dk) (Labor formula, min) field. For a field left empty, the fixed time on the row is used.
    Enterİşçilik formülü (dk)Value: 3 * BOY
    Routing revision — operation selection condition and time formulas
    1. 1Selection condition and formulas — opens below the row
    2. 2Selection condition — operation comes when Yes
    3. 3Time formula — replaces the fixed time
    4. 4Check — validation without saving
    5. 5Create Revision — draft revision
  5. Save the draft revision with Revizyonu Oluştur (Create Revision), then release the revision.
    ClickRevizyonu Oluştur
Result
On orders opened after the revision is released, operations are selected according to the configuration and times are calculated from the formula; on the routing detail, the rule text appears under each operation.
Super routing — operation selection conditions and time formulas
  1. 1Conditional operation
  2. 2Rule text — condition and formula
  3. 3Fixed time — replaced by the formula

What you need to know​

  • If the selection condition is Evet (Yes), the operation is included in the order; if it is Hayır (No) or unknown, it is not. Empty = always.
  • The formula replaces the fixed time (it is not added, unlike the quantity formula in the BOM). The result must be between 0 and 1,000,000 minutes and is rounded to two decimals. Machine and labor are per base quantity, setup is per lot.
  • If a value read by the formula is empty, the order is not opened: N numaralı operasyonun işçilik formülü hesaplanamadı — konfigürasyonda gereken değer yok. (The labor formula of operation N could not be calculated — the required value is missing in the configuration.) If the result is not a number: … sayı vermeli. (… must return a number.); if it is out of range: … 0 ile 1000000 dakika arası değer vermeli. (… must return a value between 0 and 1000000 minutes.)
  • The selection condition must return Yes/No: N numaralı operasyonun seçim koşulu Evet/Hayır vermeli. (The selection condition of operation N must return Yes/No.)
  • If no operation is selected at all: Konfigürasyon rotanın hiçbir operasyonunu seçmiyor — rotanın seçim koşullarını düzeltin. (The configuration selects none of the routing's operations — correct the routing's selection conditions.)
  • A rule can be saved only in the routing of a configurable card: Seçim koşulu ve formüllü süre yalnız yapılandırılabilir kartın rotasında kullanılır. (Selection conditions and formula times are used only in the routing of a configurable card.)
  • For bulk entry, use the SecimKosulu, HazirlikFormulu, MakineFormulu and IscilikFormulu columns on the Operasyonlar (Operations) sheet of the Routings import workbook.

Example — sized conveyor (DMO-KSL-01)​

Op.RuleOn the order with BOY 12.5 · PVC · Koruma Evet
10 Profil kesim (Profile cutting)Machine formula 2 * BOY * 0.8Machine 20 min
20 Şase ve makara montajı (Frame and roller assembly)Labor formula 30 + 6 * BOY105 min
30 Bant montajı ve gerdirme (Belt assembly and tensioning)Labor formula EGER(BANT_TIPI = 'PU', 40, 25) + 2 * BOY50 min
40 Koruma kapağı montajı (Guard cover assembly)Selection condition KORUMA = EVET, labor 3 * BOY37.5 min
60 Çalışma testi (Running test)Labor EGER(BOY > 10, 30, 20)30 min